نمایشگر 7 اینچ لمسی دارای ورودی HDMI مناسب برای انواع برد های دارای پورت HDMI شرکت WAVESHARE

نمایشگر 7 اینچ لمسی دارای ورودی HDMI مناسب برای انواع برد های دارای پورت HDMI شرکت WAVESHARE5116


2,560,900 تومان

ناموجود

دسته بندی :

( آخرین بروزرسانی : 24 مهر, 1399 )

بررسی اجمالی محصول

  • 800×480 hardware resolution Capacitive touch control

  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers

  • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free

  • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free

  • Backlight can be turned off to lower power consumption

نقد و بررسی : نمایشگر 7 اینچ لمسی دارای ورودی HDMI مناسب برای انواع برد های دارای پورت HDMI شرکت WAVESHARE

  • رزولیشن: 800×480 HD

  • سایز: 7 اینچ

  • ورودی HDMI

  • نوع تاچ: خازنی

  • رابط USB برای تاچ

800×480, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems

Features

800×480 hardware resolution
Capacitive touch control
Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
Backlight can be turned off to lower power consumption
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable

FAQ

Why the LCD doesn’t work with my Raspbian?

To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.

Why the LCD still doesn’t work with the Waveshare provided image?

Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.

Which power supply should I use?

It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC’s USB port might have not enough power. For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

‫0/5 ‫(0 نظر)
دیدگاه

دیدگاهی ثبت نشده.

اولین نفری باشید که نظر می دهید برای “نمایشگر 7 اینچ لمسی دارای ورودی HDMI مناسب برای انواع برد های دارای پورت HDMI شرکت WAVESHARE”